●【品名】美國Hosa Technology麥克風靈敏度衰減轉接器ATT-448
Connectors: XLR3F to XLR3M
This adaptor is designed to add attenuation to a dynamic microphone. Selectable -20 dB, -30 dB, or -40 dB attenuation make it ideal for karaoke, public speaking, and other events during which a single microphone is shared.
此轉接器是為動態麥克風設計用來增加衰減。可選的-20 dB，-30 dB或-40 dB衰減，使其為卡拉OK，公開演講和其他人共享單個麥克風時的理想選擇。
Snare drum clipping your preamp? Is the DI for an Active bass driving the preamp too hard? Do you want to drive the output, but not the input of your preamp? This tool is for you.
鼓限制了你的前置放大器？活動低音的DI是否在驅動前置放大器時太硬？你想驅動輸出，但不想驅動您的前置放大器輸入？這個工具就是適合你的。
No recordist's tool kit would be complete without this invaluable tool. You may not need it all the time, but it is crucial when you do.
沒有這個工具，沒有錄音師的工具包是完整的。你可能不是一直需要它，但是當你需要它時，它將非常重要。
If you decide to get an attenuator, then this is the one. You can knock 20, 30 or even a massive 40dB off the top of your signal.
如果你想得到一個衰減器，它就是你要的。你可以降低你的信號20,30或甚至40dB。
This ATT-448 from Hosa is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will "peg the meters" at the board and cause audio distortion.
這個Hosa ATT-448是一個可切換輸入的衰減器，用於當輸入過高時，可將輸入降低至混頻器裡。舉例來說，當麥克風在一個非常大的音源前面時，可以會常過其規格而導致音源失真。
The ATT-448 attenuator is placed in-line between the microphone and the board and the appropriate amount of attenuation switched in. The choices are 20, 30, or 40dB of signal reduction, for a wide range of uses on stage and in the studio.
ATT-448衰減器被放置在麥克風和boad之間且可適當作衰減量調整切換。可以選擇20,30或40dB的信號降低，在舞台和演播室有廣泛的用途。 |
